Fax.		01843-84 77 22
Where to buy


Share on Facebook
Share on Google Bookmarks
Share on Twitter
Share on Reddit
Share via e-mail

Other Brantho-Korrux Products

Flat and gloss finishes

Brantho-Korrux ‘Nitrofest’

Flat finish version of Brantho-Korrux ‘3 in 1’. ‘Nitrofest’ is a heavy duty, very fast drying coating that can be applied to or over coated by nitro-cellulose coatings.  A two coat system is weather, seawater and oil resistant. Application by brush, roller or spray.

Touch dry after 10 minutes, stackable after 8 hours.  If force dried for 20 minutes at 60° C, dry to handle after 30 minutes and stackable after 1 hour.  

Lead and chromate free.  Contains no aromatic hydrocarbons such as xylene or toluene.

Brantho-Korrux ‘Robust-Lack’

Very similar product to Brantho-Korrux ‘3 in 1’ but high gloss finish. Very flexible, weather resistant and environment friendly.  Can be used as primer, intermediate and top coat.  

Designed for spray application.

Optional Primers

Although Brantho-Korrux ‘3 in 1’ acts as a primer, for very rough surfaces such as badly corroded mild steel, cast iron etc or very smooth surfaces such as aluminium, stainless steel, new galvanised steel etc, the following primers are recommended for use as the first coat.

Brantho-Korrux ‘Rust Primer’

Lead free rust primer recommended for use on very rough surfaces.  This high build coating penetrates any rust, provides a high film build over the ‘peaks’ of rough surfaces which reduces the possibility of premature ‘needle rusting’. Free from aromatic hydrocarbons.

Brush application recommended . Excellent adhesion on manually prepared surfaces, wet and dry blasted surfaces.  Flash rust acceptable.

Brantho-Korrux ‘Adhesion Primer’

Recommended to provide maximum adhesion to very smooth surfaces such as galvanised steel, stainless steel, aluminium etc especially in harsh industrial and marine environments.

Environmentally friendly, free from heavy metals and aromatic hydrocarbons.

Application by brush, roller or spray.